English Version
Extension Faucet Setup & Usage Guide: How to Use 360° Swivel and 15cm Pull-Out to Reduce Splash
New extension faucets can feel confusing at first. This step-by-step guide covers pre-checks, how to aim with 360° swivel, how to use the ~15cm pull-out reach, and how to choose between two spray modes for cleaner, less-splash rinsing.
Pre-install checks (the 3-minute checklist)
Confirm universal compatibility with your existing faucet, check the outlet position for usable swivel space, and remember that manual measurements may vary by about ±2cm.
How to aim with 360° swivel
Use the sink as your reference: first align the stream toward the sink bottom center, then fine-tune to where you place dishes. If you see splash, adjust the angle so the water lands inside the sink.
How to use the ~15cm pull-out reach
Match pull-out length to the task: medium pull for everyday dishwashing, near full pull for rinsing large pots, and shorter pull for cleaning edges and corners.
Choosing spray modes with one touch
Pick modes based on cleaning intensity—stronger for removing foam and grease quickly, gentler for rinsing delicate surfaces. Once you find your routine, cleaning becomes faster and more consistent.
